BrewBlog: True Hearted IPA
Specifics
General Information
Method: Partial Mash

Moved to secondary on 12-09-16

Calories, Alcohol, and Plato Calculator
Original Gravity: 1.064
Final Gravity: 1.012
Initial Gravity (Plato): 15.67° P
Final Gravity (Plato): 3.07° P
Real Extract: 5.35° P
Apparent Attenuation: 80.4%
Real Attenuation: 65.9%
Alcohol By Volume (ABV): 6.9%
Alcohol By Weight (ABW): 5.4%
Calories (12 ounces): 210
Comments

I dry hopped this beer using pellets in the secondary, 2 weeks before kegging it. I had two carboys: Did one with cascade, and one with simcoe.

The hops react violently with the beer, and cause a terrible blow off, so next time, be sure to have plenty of headroom in the carboy. The hops do not settle out very well either, so I'll probably use a hop bag next time, and do them in the keg, and remove them before carbonating it.

When I racked from the carboy to my first keg, I just siphoned it normally. Lots of hop residue int he beer in the keg. What a mess. I hope if settles in the keg and gets pushed out the dip tube int he first several pints, and then is gone. For the second carboy, I siphoned through a super fine hop bag, and it caught all of the residue. Whew!

Scale Recipe
Enter desired final yield (volume):
 gallons  
Extract
6.00 pounds LME - Light 25% of grist
6.00 pounds Total Extract Weight 25% of grist
Reference
Malts and Grains
Non-Fermentables
4 tblspoon Irish Moss @ 15 minutes  
Reference
Hops
Boil
Total Boil Time: 60 minutes
Reference
Yeast
Name: American Ale
Manufacturer: Wyeast
Product ID: 1056
Type: Ale
Flocculation: Medium
Attenuation: 75%
Temperature Range: 60–72°F
Amount: 250 ml
Procedure
Water Amounts Calculator
Target Final Boil Volume: 10 gallons  
Evaporation Rate: 1.5 gallons per hour  
Boil Time: 60 minutes  
Runoff Volume Needed: 11.92 gallons 10 gallons (final boil volume) ÷ 0.96 (cooling) + 1.5 gallons (boil evaporation)
Grain Amount: 18 pounds  
Grain Absorbtion: 3.6 gallons  
Total Water Needed: 16.52 gallons 11.92 gallons (runoff) + 3.6 gallons (grain absorbtion) + 1 gallons (equip. loss)
Mash Water Needed: 5.99 gallons based on 1.33 quarts per pound of grain
Sparge Water Needed: 10.53 gallons 16.52 gallons (total water) – 5.99 gallons (mash water)

I was over on my water amounts by about two gallons.  This was because i used two gallons of water to dissolve my LME into so I did not have to do it in the boil kettle, as it is hard to stir it in the big kettle.

Fly sparged.  Brewhouse efficiency was 76.8%

I skipped the 1 lb of DME that I was planning to use, and had calculated that I needed to hit the target gravity.  Sure enough, I ended up .004 short.  Still, not too bad.

I changed the hoses to my plate chiller, and it is cooling much better now too.  NICE!

Considering that I will have 12.5 gallons in my fermentor, the OG is not too bad.  Had I boiled off another gallon, it might have been right on the money.

Both of my smack packs were good this time, so that's all I used for yeast.  I forgot to use yeast nutrient/energizer in the boil

 

Special Procedures

Dry Hopping  10/1/2012

2x carboys w/4gal each with 1 oz centenial

1x carboy with 2 gal with 1 oz simcoe

Tasting Reviews
1 Review Submit a Review Refresh Page
45-50 = Outstanding 30-37 = Very Good 14-20 = Fair
38-44 = Excellent 21-29 = Good 00-13 = Problematic
Review by
Aroma: / 12
Appearance: / 3
Flavor: / 20
Mouthfeel: / 5
Overall Impression: / 10
Cumulative Score: 0 / 50 Problematic
print logprint default Output to Beer XML
Chad's BrewBlogs
All Club BrewBlogs
2010BB Scottish 80 Sh... Mar 21, 2010
Lost Lake Steamer Mar 14, 2010
Rookery Brown Ale Feb 8, 2010
Ice Auger IPA Jan 17, 2010
Kearney’s 39 Nov 27, 2009
Kearneys Irish Brothe... Nov 27, 2009
Belgian Golden NS Str... Nov 1, 2009
Surley Imperial Brown... Oct 10, 2009
<< <  More  1 2 3 4 [5] 6 > >>